With adhesiveSold out
Two-Color Acrylic Panels
4.7139 reviews (rated 4.7 out of 5)
Laser-engrave the top color to reveal the color underneath. 26 color pairs for hat patches, tags and signs, each 12" × 24" × 1/16", with or without heat-activated adhesive.Engrave the top color to reveal the one below.
- 12" × 24" · 1/16" thick
- With or without adhesive
- Order by 2pm CT, ships same business day
Choose your colors
Names read top color / engraving color.
26 colors
With adhesiveSold out
WithoutSold out
WithoutSold out
No colors match these filters.
Which laser do you have?
Every panel has two layers of acrylic. How cleanly it engraves and cuts depends on your laser and on the colors in the sheet.
CO₂ or fiber laser
Colors with a white layer are made for CO₂ and fiber lasers.
Diode laser
White reflects a diode laser's light, so panels with a white layer may not engrave or cut cleanly. Choose a color without white.
“I was concerned about etching and cutting with my 20W diode, but I had absolutely nothing to worry about.”
Lasers and settings vary, so run a test on a scrap piece first. Handling and engraving tips: Acrylic Panels User Manual
How to choose your panel

Pick the top color
It's the surface of your patch or sign. Match it to the cap or the brand: brushed metal, a wood look, black, white or a bright color.

Pick the engraving color
Where the laser removes the top layer, the color underneath shows through. Strong contrast, like black over white, stays readable from a distance. To make most of the patch the engraving color, engrave the background and leave your design in the top color.

With or without adhesive
With adhesive, $26: our heat-activated adhesive is already on the back, under a protective paper. Engrave and cut, peel the paper, then heat-press the patch onto a cap.
No adhesive, $22: for signs, tags, emblems and pieces you'll glue, tape or sew without heat.
Need adhesive later? Shop Patch Adhesive
Made with our acrylic
Customer photos from reviews. Tap a photo to shop that color.
-
Stainless Steel / BlueIshmael C. -
Sky Blue / YellowJustin D. -
White / BlueMike C. -
Black / RedLawrence O. -
Orange / BlackDerek M. -
Black / SilverRandi D. -
Walnut / WhiteRich E. -
Deep Bronze / BlackTracy D.
4.7 out of 5 from 139 reviews
Reviews of our acrylic panels, across all colors.
This acrylic engraved very cleanly with crisp edges. Very happy with this product. I will be stocking it for future orders.
The quality of the acrylic is great. It's a perfect thickness. I order the sheets without the adhesive. I have been making emblems and adding a two way water proof tape so that they can be mounted on the back windows of cars and trucks.
These laser great and turn out awesome. Pretty simple to warm up and get pressed on the hat too.
This was a big hit for my last hat show!
Awesome material! Yellow is super bright! Customer service is second to none!
Worked well. Little haze on the blue.
Show more reviews
This is the first time I am using the black to gold. I took the image and inverted the black and white so that the final product would be mostly gold. I made this for someone who is going to use it as a military hat badge. It came out great and the person I made it for loved. He has asked me to make more.
Really nice to work with. The red pops against the black
After feeling out the best engraving settings, the prints were flawless!
This dual layer acrylic engraved a pressed really nice.
Questions about acrylic panels
Which lasers work with these acrylic panels?
Colors with a white layer are made for CO₂ and fiber lasers. On a diode laser, white reflects the light, so those colors may not engrave or cut cleanly. Lasers and settings vary, so test on a scrap piece first.
Should I get a panel with or without adhesive?
With adhesive ($26), the back has our heat-activated adhesive under a protective paper, ready to heat-press onto caps. Without adhesive ($22) suits signs, tags and pieces you'll glue, tape or sew. You can add adhesive later with our Patch Adhesive sheets and rolls.
How do I press an acrylic patch onto a hat?
Acrylic needs more heat than other patch materials: about 15 extra seconds to activate the adhesive. Our heat press chart lists acrylic settings for top-heat-only and dual-heat cap presses. We're still testing DuoForge settings for acrylic. Let the patch cool before you handle it.
How do I clean the panel after engraving?
Put a little isopropyl alcohol on a soft brush and gently brush the engraved areas to lift dust and residue.
What size and thickness are the panels?
Every color comes in one size: 12" × 24", 1/16" thick, with a top color over a second color.
How fast do you ship, and can I return a panel?
Orders placed by 2pm CT ship the same business day. Orders of $80 or more ship free in the contiguous US. You can return a panel within 30 days of delivery; a 20% restocking fee applies and return shipping is paid by the customer. See our refund policy.





























