For laser-engraved hat patches & more

Thick Leatherette Sheets

1.85 mm two-layer leatherette with our heat-activated adhesive already applied. Engrave, cut, press. 70+ colors, by the sheet or by the yard.

★★★★★4.8 from 672 reviews
Free US shipping over $80 · Order by 2pm CST, ships the same business day
Customer hat with a Rawhide leatherette patch Rawhide, pressed by a customer
Customer hats with Rawhide leatherette patches
Customer hat with a Silver Carbon Fiber leatherette patch
▤
1.85 mm thickEngrave the face, reveal the contrast layer underneath.
◎
Adhesive appliedHeat-activated backing made for pressing on hats.
✦
Laser-readyWorks with CO2, diode, fiber and UV lasers.
%
Mix colors, save up to 20%Volume pricing counts every color in your cart.
Shop by look

Find your finish

Every look engraves to a contrast color. Tap one to filter the colors below.

Customer favorites

The colors hat makers reorder most

See all colors
All leatherette

Shop all colors

Mix & match any colors and save:Buy 3+: 6% off5+: 8% off12+: 10% off24+: 12% off36+: 15% off50+: 20% off
Look
Engraves Show

No colors match these filters.

Not sure which color?

Hold all 70 colors in your hand

  • A swatch of every leatherette color in one pack
  • Show clients real options at the counter or at events
  • Run quick laser tests before you buy full sheets
Get the Sample Pack — $25

Practicing or testing settings? Get 10 factory-second sheets for $40 →

Leatherette Sample Pack 70 colors
Color pairing guide

Pick a patch that pops on the hat

Starting points from what customers press most. Contrast first: a light patch on a dark hat, a dark patch on a light hat.

How it works

From sheet to finished hat in 3 steps

1

Engrave & cut

Engrave the top layer to reveal the contrast color, then cut the shape. Run a quick test grid the first time you use a new color.

Product instructions →
2

Press it on

The adhesive is already on the back. Press with a single or dual-heat cap press; settings for each are in the FAQ below.

3

Sell it

One 12" x 24" sheet yields about 30 to 40 hat patches, depending on patch size and spacing.

Sheet or yard?

Buy the way you produce

Sheet · 12" x 24"

$13
$6.50 per sq ft · every color
  • Best for testing colors and small orders
  • Fits most desktop lasers
  • About 30 to 40 hat patches per sheet
Save about 22% per sq ft

By the yard · 26" x 36"

$33
$5.08 per sq ft · best-selling colors
  • Built for production runs and big jobs
  • Cut to the size your laser bed fits
  • Same 1.85 mm material and adhesive

Prices before volume discount. Patch yield depends on patch size and spacing.

FAQ

Leatherette questions, answered

Is this real leather?

No. It's a two-layer leatherette (faux leather) made for laser engraving: the top color engraves away to reveal the contrast layer underneath. Looking for genuine leather? See our full-grain leather patches.

How thick is it, and what's on the back?

1.85 mm. Sheets come with our heat-activated adhesive already applied, protected by a release liner. Some best sellers are also available without adhesive for sewing.

What heat press settings should I use?

Single heat plate press: pre-heat the hat for 30 seconds at 300°F, then press the patch for 25 seconds at 300°F.

DuoForge dual-heat press: 300°F top / 320°F base, 25 seconds to pre-heat the cap, then 25 seconds with the patch.

Other dual-heat cap presses: top plate 270–290°F, bottom plate 380–400°F, medium pressure, about 45 seconds.

Which lasers can engrave it?

CO2, diode, fiber and UV lasers. Run a small test grid on each new color, since contrast and depth vary by color.

How do I keep patches clean after engraving?

Engrave only through the top layer (going deeper creates more residue), then wipe the patch with isopropyl alcohol before pressing.

Can I sew it or use hook-and-loop instead of pressing?

Yes. Many customers stitch their patches or add hook-and-loop backing. Pick the no-adhesive option where it is available.

Is there a volume discount?

Yes, and you can mix and match colors: 3–4 sheets save 6%, 5–11 save 8%, 12–23 save 10%, 24–35 save 12%, 36–49 save 15%, and 50 or more save 20%.

Do you sell discounted sheets for practice?

Yes, our Factory Seconds pack: 10 full-size 12" x 24" sheets in assorted colors that didn't pass our cosmetic check (small marks, color or edge variation), with more than 90% usable material. Colors are random and it's final sale, so it works best for laser tests, practice runs and small pieces.

When will my order ship?

Orders placed by 2pm CST ship the same business day. US orders over $80 ship free.

Leatherette sheets for laser engraving. Patch Crafters thick leatherette sheets are 1.85 mm two-layer leatherette with heat-activated adhesive, made for laser-engraved hat patches, keychains, coasters and custom gear. Choose from 70+ colors, including leather-look browns, vintage, carbon fiber, camo, wood grain, denim, neon, brushed metal and holographic, in 12" x 24" sheets or by the yard. Compatible with CO2, diode, fiber and UV lasers and with single- or dual-heat cap presses.

Fast free shipping

Free US shipping on orders of $80 or more

30-day returns

Return within 30 days of delivery. See our refund policy for details.

100% secure checkout

All payments are processed securely

Customer Service

Mon–Sat, 8am–6pm CT. Text us at (405) 937-1596.